Supply Flow Meters

Optimize your industrial processes.

Devices

medidoresdeflujo

Gas Flow Meters.

The flow measurement is perhaps the highest percentage in terms of industrial measurement variables are concerned. No other variable is the importance of this, since no flow measurements would be impossible the material balance, quality control and even the operation of continuous processes.

We have a variety of devices to measure fluid depending on its main features are as viscosity, density, specific gravity, compressibility, temperature and pressure.

The gas flow meters are measuring instruments having low pressure drop and high accuracy. They can measure gases, liquids and vapors also they have no mechanical or moving parts quality that makes it a team with high reliability and low maintenance.

Main features:

> Diameter: Ø25 ~ Ø500mm
> Temperature: -10ºC ~ 350ºC.
> Ambient temperature: -30ºC ~ 60ºC
> Humidity: 5-90%
> Speed: 0.3m Liquid / s ~ 7m / s, 3m Gas / s ~ 55m / s
> Pressure Range: 1.6 Mpa or by special order.
> Precision: ± 0,5%; ± 1%.
> repeatability: 0,2%
> Departure: 4-20 mA, 0-10 V, impulse, RS232, RS485.
> Compensation: Temperature compensation; Pressure compensation.
> explosion Class: ExiallBT4

 

Magmeters.

The flow measurement is perhaps the highest percentage in terms of industrial measurement variables are concerned.
No other variable is the importance of this, since no flow measurements would be impossible the material balance, quality control and even the operation of continuous processes.

 

Mechanical flow meters.

The mechanical flowmeters are measuring instruments which operate by turning a rotor, driven by the liquid stream tangentially. They are simple, economical and practical, made to measure very precisely in pipes from 1 1/2 "to 3".

These flow meters are reliable, inexpensive, easy to install and calibrate on the workplace.

 

Ultrasonic Flow Meters.

Ultrasonic flow meter are fed electrically and its principle functionality as it is called transit time.
It consists of measuring the difference between the time it takes for two signals traverse the same distance but in the opposite direction using as a fluid medium.

If the fluid flow rate is zero, the times are equal, but when no flow times are different, since the speeds of the signals will be affected by the fluid whose flow is to be determined; this time difference more knowledge about the geometry of the pipe and the speed of sound in the medium to assess the fluid velocity or flow.

Main features:

> Power operation: 8-36 VDC.
> Current: 50 mA (Under the condition of use without keyboard).
> Signal output: 1 channel standard isolation RS485 output, 1 Channel Isolation 4-20 mA or 0-20 mA (passive output), two output channels with OCT (scheduled between the pulse width (6-1000 ms) default before leaving the factory (200ms).
> Signal Input System 2 channel and 3-wire PT100 input loop platinum resistance to heat meter serves to show quantity of heat. 3-channel 4-20 mA optional input accuracy 0.1%, has the ability to input signals of pressure, liquid level, temperature, etc.
> Display: 2 * 10 LCD, showing the flow instantly, speed, positive, negative and totalizing flow.
> Operation: 4 touch keys for keyboard use.
> Other functions: automatic memory positive, negative, tote, and amount of heat flow from the previous 512 days, 128 months 10 years.
> Level of protection: IP65.

medidoresdeflujo2 - copia

Socios
® InterSAD 2017 All Rights Reserved